|
Wood Baseboard Vents
Wood Base Vents Angled Baseboard Diffusers
|
Designed to cover duct openings near the base board.
The base vent replaces the metal register. The angled face of the base
vent covers the entire opening leaving only the detailed craftsmanship
to be admired. Use the overall dimensions to determine the size you need
to cover opening. Please specify Length x Height x Depth for
dimensions. Stock sizes available in trimline style.
Customs available
in original or trimline styles.
|
Base Vent Model (shown in trimline
style)
Trimline basevents w/ metal damper option
Click for...
help in sizing wood vents
Overall Dimensions
To Cover 2 Standard Duct Sizes
| |
| ORDER SIZE |
FREE AREA |
OVERALL DIMENSIONS |
| (Duct Opening Inches) |
(Square Inches) |
(L x H x W) |
| 15" |
24 |
15 x 5 x 3-1/4 |
| 18" |
28 |
18 x 5 x 3-1/4 |
|
|
Exclusive fastening system...click here to see details
To stay away from a custom size and to not screw around
with the existing molding, the length of these vents is one of the most
important measurements. Ordering to long will mean cutting any existing moulding and
too narrow filling in.
If you are lucky enough to use a stock width, the height and
depth of this vent in most instances, can be a little larger than the duct
opening. You should also check to cover any marks
or stains from the old vent. Use the chart above and illustration
below to help you choose the correct stock base board vent.
|
 |
Usually installed over a duct opening located in the floor
up against a wall.
To stay away from a custom size and to not screw around
with the existing molding, the width of these vents is probably the most
important measurement. Ordering to wide will mean cutting the molding and
too narrow filling in.
If you are lucky enough to use a stock width just be sure
the depth will be enough to fully cover the duct. If the baseboard molding
is not yet installed, try to use a larger size basevent.
If the duct is only 10" or 12" we still recommend
the 18" baseboard vent for better air flow.
Wood base vents can be made custom to any size and in
any wood.
Order unfinished or with a factory finish.
|
| 
